Products / Solutions

FENCE DETECTION SYSTEM

With more than 5 million meters (16 million ft) of cable now protecting security sensitive sites worldwide, Southwest Microwave’s INTREPID™ and MICRONET™ fence detection systems are today’s perimeter security solutions of choice due to their unique ability to pinpoint perimeter disturbances to within 3 meters (10 ft) and eliminate nuisance alarms common to other fence sensors.

INTREPID™ and MICRONET™ intelligent sensors reliably detect attempts to climb or cut a fence, while ignoring distributed noise from wind, rain or vehicle traffic. By successfully distinguishing legitimate attacks from harmless environmental disturbances, nuisance alarms are prevented.

Software-controlled Free-format Zoning lets users assign alarm zones anywhere along the cable, reducing hardware requirements, lowering installed cost and assuring superior detection. Sensitivity Leveling™ calibrates the sensor to uniquely compensate for variations in fence fabric, resulting in uniform detection along the fence line.

  • INTREPID™ MicroPoint™ II
  • INTREPID™ MicroPoint™ Cable
  • MICRONET™
  • MicroPoint™ Tape

BURIED CABLE DETECTION SYSTEMS

Southwest Microwave’s INTREPID™ buried cable detection systems offer reliable protection for applications where covert perimeter protection is essential. These volumetric intelligent sensors offer unrivalled features and unique detection capabilities, including precise location of walking, running or crawling intruders to within 3 meters (10 ft). Terrain-following capabilities allow our buried systems to follow ground contours and handle tight turns with ease.

INTREPID™ buried sensors are simple to configure and system parameters can be set to individual site requirements. Patented Sensitivity Leveling™ calibrates the sensor to uniquely compensate for variations in ground composition or site conditions – resulting in uniform detection along the protected area. Software-controlled Free-Format Zoning lets users assign detection zones anywhere along the cable, keeping hardware requirements low and assuring superior detection.

  • INTREPID™ MicroTrack™ II
  • INTREPID™ MicroTrack™

ALARM MONITORING AND CONTROL SYSTEMS

Southwest Microwave offers a range of security monitoring and control software for single or multi-site applications that operate with its INTREPID™ and MICRONET™ perimeter security systems.

Options include full color graphic map displays detailing precise alarm location and integrating data communications, event reporting and auxiliary security devices, to advanced security management tools incorporating live video and comprehensive assessment and reporting tools for centralized control of perimeter security operations across large or multiple sites.

A range of universal System Controllers seamlessly network new-generation, single-platform INTREPID™ perimeter detection devices, contact-closure auxiliary security devices and CCTV equipment or other system outputs via a common, open-architecture communications protocol. Universal controllers offer open-architecture networking of fence, buried and microwave sensors for high security or physically diverse applications that call for the introduction of multiple sensor technologies.

  • SINGLE-PLATFORM INTREPID™ SYSTEM CONTROLLERS
  • PERIMETER SECURITY MANAGER
  • INTREPID™ MAP MONITOR / ADVANCED MAP MONITOR
  • MICRONET™ PREMIUM PERIMETER MONITOR

MICROWAVE SENSORS

Microwave sensors, also known as Radar, RF or Doppler sensors, detect walking, running or crawling human targets in an outdoor environment. Southwest Microwave developed the industry’s first bi-static microwave sensor in 1971, and has pioneered the development of flexible, reliable microwave links and transceivers for the protection of open areas, gates or entryways and rooftop or wall applications.

Microwave sensors generate an electromagnetic (RF) field between transmitter and receiver, creating an invisible volumetric detection zone. When an intruder enters the detection zone, changes to the field are registered and an alarm occurs.

Our microwave sensors are easy to install, provide high probability of detection, low nuisance alarms and resistance to rain, fog, wind, dust, falling snow and temperature extremes. Most operate at K-Band frequency, maximizing detection performance and minimizing interference from external radar sources.

  • INTREPID™ MICROWAVE 330 DIGITAL MICROWAVE LINK
    K-Band Detection to 457 m (1500 ft) / 244 m (800 ft) – CE. Networks seamlesly with other INTREPID™ technologies.
  • MODEL 300B MULTIPLE RANGE MICROWAVE LINK
    X-Band Detection to 183 m (600 ft). Short range pattern for gate protection. Extended range patterns for full perimeter protection.
  • MODEL 310B LONG RANGE MICROWAVE LINK
    K-Band Detection to 457 m (1,500 ft). Narrow beam width for operation at long ranges and very narrow corridors.
  • MODEL 316 LONG RANGE MICROWAVE LINK
    K-Band Detection to 244 m (800 ft). Narrow beam width for operation at long ranges and within narrow corridors.
  • MODEL 310B-33456 EXPLOSIONPROOF MICROWAVE LINK
    K-Band Detection to 100 m (328 ft). Reliable intrusion detection in the presence of flammable or combustible materials.
  • MODEL 316-33457 STOP BAR CONTROL SENSOR
    K-Band detection to 244 m (800 ft). Reliable detection of aircraft or vehicle movement between taxiway and active runway.
  • MODEL 320SL DUAL SYNCHRONIZED MICROWAVE LINK
    X and K-Band Detection to 183 m (600 ft). Maximum-security stacked sensor configuration for the highest risk applications.

RELOCATABLE MICROWAVE SENSORS

Southwest Microwave’s M.I.L.PAC re-locatable microwave sensors are designed to satisfy temporary perimeter intrusion detection requirements in an outdoor environment. These rapid-deployment volumetric sensors provide high probability of detection and low nuisance alarms, and are resistant to rain, fog, wind, dust, falling snow and temperature extremes.

Precise detection pattern, extended battery life and unmatched ease of installation make M.I.L.PAC sensors ideal for protection of visiting VIPs and critical mobile assets. They can be used at gates, portals or roadway crossings, or to establish a full perimeter of volumetric detection.

For quick setup, M.I.L.PAC sensors include rugged, lightweight adjustable tripods and allow external access to sensitivity and range controls in tampered, weatherproof fittings. Alarm transmission and annunciation are achieved via wireless radio alarm transmitter and receiver at distances up to one mile. K-Band frequency maximizes resistance to external radar interference.

  • M.I.L. PAC 316 RELOCATABLE MICROWAVE LINK
    K-Band Detection to 244 m (800 ft) – CE Certified. Narrow beam width for operation at long ranges and within narrow corridors.
  • M.I.L. PAC 385 RELOCATABLE MICROWAVE TRANSCEIVER
    K-Band Detection to 122 m (400 ft). Continuously variable range cutoff prevents alarms from moving targets beyond a specified range.

© 2013 - All Rights Reserved - http://orange-brands.com

Powerd by: AA IT Group